1/4″-20 Thread Camera Mount



  • 3D Printed
  • Materials: PLA/ABS/U-PET
  • Made to order
  • Ships worldwide from Ephrata, Pennsylvania
SKU: 1/4"-20 Thread Camera Mount Categories: ,


Product Details:
Capture your adventures with range of economic and heavy duty camera mounts. There are four choices available. The economic design mounts are designed as a lightweight, cost efficient tool to attach a small camera in order to capture still or video footage. On the other end of the spectrum, a heavy duty style mount is designed to be more resilient and solid for a camera on the larger side.
1.    Economic – Nerf® Mount to ¼-20 Thread
2.    Heavy Duty – Nerf® Mount to ¼-20 Thread
3.    Economic – Picatinny Mount to ¼-20 Thread
4.    Heavy Duty – Picatinny Mount to ¼-20 Thread
Nerf® mounts are specifically designed for attachment to a Nerf® gun rail, the Nerf® mount is generic amoung Nerf® guns. The Picatinny mount is intended for the standard or custom Picatinny rails on other 3D Printed Solid products.
To mount a camera or other device, place the hex bolt so that it fits into the slot in the mount body. Test fit the camera onto the mount prior to installing the mount directly onto a rail. Note the direction of the camera after tightening onto mount; if the camera is not facing the direction you want, reposition the hex bolt to face the desired direction when fully tightened. There are multiple slots every thirty degrees for the hex bolt in order to custom fit your preference. Once the hex bolt is in the desired position in the mount, remove the camera and place the mount onto the desired rail, tightening the two set/cap screws until snug. Then thread camera onto hex bolt.
1. Economic Nerf® mount to 1/4"-20 Thread (slip-on design)
2. Heavy Duty Nerf® mount to 1/4"-20 Thread (clamp-on design)
3. Economic Picatinny mount to 1/4"-20 Thread (slip-on design)
4. Heavy Duty Picatinny mount to 1/4"-20 Thread (clamp-on design)
Economic Slip-on mounts: 1.76” (4.47cm) long, 1.12” (2.85cm) wide and 0.62” (1.58cm) in height.
Heavy Duty Clamp-on mount: 2.55” (6.47cm) long, 1.25” (3.17cm) wide and 0.75” (1.9cm) in height.
You will need a (3/32” slip-on design) or a (7/64" clamp-on design) hex wrench to install this rail. Tools Link
– (1) Camera Mount Adapter
– (2 or 4) Stainless Steel Screws
– (1) ¼-20 Stainless Steel Hex Bolt

Additional information

Weight N/A
Dimensions N/A
Mount Type

Nerf to 1/4"-20 Economic, Nerf to 1/4"-20 Heavy Duty, Picatinny to 1/4"-20 Economic, Picatinny to 1/4"-20 Heavy Duty


There are no reviews yet.

Be the first to review “1/4″-20 Thread Camera Mount”

Your email address will not be published. Required fields are marked *